dial calibration tester

Range 0-25mm 
The dial gauge calibration tester series “ V ” is one of the most efficient design, specially to check dial indicators, dial test indicators (Lever type dials) and cylinder bore gauges reading 0.01mm. As an additional feature this is a 2 in 1 calibrator which can also calibrate 0.001mm reading dial indicators having short range. Accuracy of the measuring equipment should be 3 to 10 times more accurate than the indicators to be tested. For this, large micrometer head with widely spaced graduation lines for better readability giving direct reading of 0.002mm and having a vernier scale with 9/10 divisions which gives a least count of 0.0002mm is provided. This is suitable for testing 0.01mm and 0.001mm dial gauges, giving an additional feature. 

Range 25mm
Micrometer Accuracy plus/minus 0.002 mm, having direct reading 0.002mm and L.C. 0.0002 mm.
Base Heavy cast iron to achieve rigidity. Size- 150 x 205 x 50mm
Height 400mm aprox.
Mounting  8 dia, and 6 for dials and dial test indicators, & up to 18mm stem dia. bore gauges.


Bracket to mount 8mm shank Electronic Probe L.C. 0.0001mm above the dial under test. For more details and enquiry please contact.