air gauge




Salient Features
  • We offer two air gauging systems -Module 1A and Module 2A- giving the most economical solution to your inspection needs on the shop floor.
  • High pressure system - High speed of response and self cleaning of gauging area ensures accurate reading of size,taper and ovality at a time.
  • Non-contact Gauging - Long life due to minimal frictional wear.
  • Two Setting Masters - Ensures correct magnification of reading at all times.
  • System Pressure Check Gauge - provides a constant check on the system pressure.
    i.e 3 bars (45 psi), regulated by a high precision regulator built in to the unit.
  • Minimum line pressure required 4.5 bars (67 psi)
  • Air consumption 46 LPM
  • Each gauge carries a calibration certificate giving actual values.
Module-1A: For Dia 6mm to 200mm.
Air Plug Gauge/Air Ring Gauge with jet ID size 2.07 mm
Module-2A: For Dia 1.5mm to 6mm
Air Plug Gauge/Air Ring Gauge with jet ID size 0.6 mm

Technical Data Sheet

Reading Range Graduation
0.0005mm ±0.020mm 20-0-20
0.001mm ±0.040mm 40-0-40
0.00005inch ±0.002inch 2-0-2

 

Averaging
Averaging

 

Flatness
Flatness

 

Groove Width
Groove Width

 

Inside And Outside Diameters
Inside And Outside Diameters

 

Out of Round
Out of Round

 

Inside And Outside Diameters
Matching

 

Squareness
Squareness

 

Straightness
Straightness

 

Taper
Taper